Unit 2,Albion works,Moor Street
Brierley Hill, West Midlands
DY5 3SZ
Brierley Hill, West Midlands
DY5 3SZ
TEL:01384
868080
FAX:01384 482088
FAX:01384 482088
Unit
2,Albion works,Moor Street
Brierley Hill, West Midlands
DY5 3SZ
Brierley Hill, West Midlands
DY5 3SZ
TEL:01384
868080
FAX:01384 482088
FAX:01384 482088
The information above is based on our current knowledge and is
given in good faith; however the company will accept no liability in respect of
any third party reliance thereon.
Other Products
from
P&P Non Ferrous
from
P&P Non Ferrous
Chemical and Physical Properties
Typical
chemical composition
| Elements | Min % | Max % |
| Bi | 0.001 | |
| Cu | 99.9 | |
| Pb | 0.005 | |
| Property/unit | Condition | Min | Max |
| Tensile Strength (N/mm2) | O | 210 | |
| Elongation in 50mm % | O | 35 | |
| Vickers Hardness (HV) | O | 55 | |
| Tensile Strength (N/mm2) | M | 210 | |
| Elongation in 50mm % | M | 35 | |
| Vickers Hardness (HV) | M | 65 | |
| Tensile Strength (N/mm2) | 1/2H | 240 | |
| Elongation in 50mm % | 1/2H | 10 | |
| Vickers Hardness (HV) | 1/2H | 70 | 95 |
| Tensile Strength (n/mm2) | H | 290 | |
Typical
mechanical Properties
O=
Annealed
M= As manufactured
1/2H= Cold Rolled, half hard
H= Cold Rolled, full hard
M= As manufactured
1/2H= Cold Rolled, half hard
H= Cold Rolled, full hard